Currently, we are using a master-standby deployment. We are about to deploy Aruba AP's at one of our other offsite buildings and will be using a local-local controller deployment there. The offsite facility will have the same WLAN's as our main facility, but different VLAN's. Since this is my first attempt to configure a local controller, I want to make sure I understand everything correctly.
1) Configure the network and VLAN's on the local controller then point it to the Master controller.
2) I know I will need to create a new AP Group on the Master and tell the AP's to terminate to the local controller in the AP Profile's LMS IP. When setting up the AP Group, can I use the same VAP profiles and just add the new VLAN to it or will I need to create new VAP profiles for the new group?
Thank you for your help!