Wireless Access

Reply
Highlighted
Super Contributor II

DHCP relay

On a 600 (M3) controller running 6.3.1.6 I need to disable the DHCP pools so that an external DHCP server can provide addresses. I seem to be having an issue with clients picking up addresses when i issue the "no service DHCP" command. Does this command disable the relay as well?

Guru Elite

Re: DHCP relay

No.  The relay relies on the ip helper-address command which is separate from the "service dhcp" command.  The service dhcp command is to start and stop the internal dhcp server.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Super Contributor II

Re: DHCP relay

I recognise they are different commands and may not seem directly connected, but on Cisco they are connected. Turning off the DHCP service means no relaying will happen. I wanted to confirm that the are separate processes on Aruba devices.

Guru Elite

Re: DHCP relay

MattF,

That's why the community is here to explain.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: