Wireless Access

Reply
Highlighted
Contributor II

Deleting AP Group wrongly named ... "AP-Group South

Hello,

 

On AOS8 I have by mistake named an AP group without the closing apostrophes. Group meant to be created was "AP-Group South" but I typed "AP-Group South in the CLI instead. I cannot now remove the group without the closing apostrophe. While it does not have any technical impact, I would nevertheless like to clean up, and remove it.

 

Thanks in advance.

 

Regards

PM


Accepted Solutions
Highlighted
MVP Guru

Re: Deleting AP Group wrongly named ... "AP-Group South

Can you try to delete in the CLI by escaping the space with a backslash \?

 

(MM01) [Subtest1] (config) #ap-group "Test\ group
(MM01) ^[Subtest1] (AP group ""Test\ group") #
(MM01) ^[Subtest1] (AP group ""Test\ group") #exit
(MM01) ^[Subtest1] (config) #no ap-group "Test\ group
(MM01) ^[Subtest1] (config) #

If that doesn't work, place the whole between ' :

(MM01) [Subtest1] (config) #show configuration effective | include Test
ap-group '"Test\ group'
(MM01) [Subtest1] (config) #no ap-group '"Test\ group'
(MM01) ^[Subtest1] (config) #
--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

View solution in original post

Highlighted
Contributor II

Re: Deleting AP Group wrongly named ... "AP-Group South

Hello Herman,

 

Many thanks for your response and suggestion.

I have now had the time to give your suggestion a try, and it did work with the second suggestion, that is to say:

 #no ap-group '"Test\ group'

 

Thank you for all the help.

 

Kind regards PM

View solution in original post


All Replies
Highlighted

Re: Deleting AP Group wrongly named ... "AP-Group South

Are you also unable to delete it via GUI?



- - - - Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE - - - -
- - - - - - - Feel free to give kudos or accept as a solution! - - - - - - - - -
Highlighted
MVP Guru

Re: Deleting AP Group wrongly named ... "AP-Group South

Can you try to delete in the CLI by escaping the space with a backslash \?

 

(MM01) [Subtest1] (config) #ap-group "Test\ group
(MM01) ^[Subtest1] (AP group ""Test\ group") #
(MM01) ^[Subtest1] (AP group ""Test\ group") #exit
(MM01) ^[Subtest1] (config) #no ap-group "Test\ group
(MM01) ^[Subtest1] (config) #

If that doesn't work, place the whole between ' :

(MM01) [Subtest1] (config) #show configuration effective | include Test
ap-group '"Test\ group'
(MM01) [Subtest1] (config) #no ap-group '"Test\ group'
(MM01) ^[Subtest1] (config) #
--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

View solution in original post

Highlighted
Contributor II

Re: Deleting AP Group wrongly named ... "AP-Group South

Hello Herman,

 

Many thanks for your response and suggestion.

I have now had the time to give your suggestion a try, and it did work with the second suggestion, that is to say:

 #no ap-group '"Test\ group'

 

Thank you for all the help.

 

Kind regards PM

View solution in original post

Highlighted
Contributor II

Re: Deleting AP Group wrongly named ... "AP-Group South

Hello Fabian,

 

No it was not possible to delete through the GUI, it gave some error message, which I do remember.

 

Eventually got to do it in the CLI as per suggestion from another member earlier in the thread, by enclosing the string between ' '

 

Kind regards

PM

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: