Wireless Access

Frequent Contributor I

Failed to Provision Mesh Point

I have configured  mesh setup.I managed to provision 1 AP-175 as Mesh Portal but when provision another AP-175 as Mesh Point, that AP stated down and getting ‘’asap_vap_gone:Got vap gone notification on unknown vap:0:0” and “asap_vap_gone:Got vap gone notification on unknown vap:0:1” error at AP console. When I use back this AP and provision it as normal AP and Mesh Portal that AP manage to provision and UP

Guru Elite

Re: Failed to Provision Mesh Point

Do you already have a mesh configuration in that ap-group?  Those messages on the console, by themselves, are inconclusive..

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
MVP Expert

Re: Failed to Provision Mesh Point

Are you powering up the mesh point on the same L2 switch as the mesh portal? If so, you cannot do that as it will create a loop. Also, those messages are innocuous.

Jerrod Howard
Distinguished Technologist, TME
Search Airheads
Showing results for 
Search instead for 
Did you mean: