Wireless Access

last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

FingerPrint-AppNote

This thread has been viewed 3 times

  • 1.  FingerPrint-AppNote

    Posted Jul 24, 2013 03:58 AM

    Good Morning,

    someone has experience with FingerPrint behavior?

     

    I have read on UserGuide that is possible create UserRole Derivation based on it, does it work correctly?

     

    And also, can I change the Vlan assigned to the smartphone after matching the UserRole?

     

    Thanks and Best Regards

    Gian



  • 2.  RE: FingerPrint-AppNote

    Posted Jul 24, 2013 06:00 AM

     

    someone has experience with FingerPrint behavior?

    Yes , are you experiencing issues ?

     

    I have read on UserGuide that is possible create UserRole Derivation based on it, does it work correctly?

    It does work correctly , what AOS you have installed ? Can you shared your config ?

     

    And also, can I change the Vlan assigned to the smartphone after matching the UserRole?

    Do you want to change the VLAN after the device get assign an IP from the certain VLAN on the VAP ?

     

    Screen Shot 2013-07-24 at 5.59.20 AM.png

     

    Screen Shot 2013-07-24 at 5.59.39 AM.png

     

     



  • 3.  RE: FingerPrint-AppNote

    EMPLOYEE
    Posted Jul 24, 2013 08:40 AM

    Yes...this works great.  

     

    If you want to change the VLAN, you would set the VLAN id IN THE ROLE that you are applying in the user derivation policy.



  • 4.  RE: FingerPrint-AppNote

    Posted Jul 24, 2013 12:12 PM

    Thanks people for your quickly replies!

     

    So, in the role can I configure a different Vlan ID from the one configured in the VAP?

    Or in the VAP I have to configure both Vlan ID?

     

    Thanks and Best Regards,

    Gian



  • 5.  RE: FingerPrint-AppNote
    Best Answer

    EMPLOYEE
    Posted Jul 24, 2013 12:14 PM

    No the VLAN ID in the VAP doesn't have to match.  In the role, you can assign a different VLAN ID.