for reference, my old unifi ap had 3 vlans.
the management vlan had no vlan id.
the other vlans had vlan ids of 10 and 20.
i plugged it into a trunk port on my switch and the devices connecting to the different vlans got an ip address from the router.
right now on the aruba i have 1 ssid and it has a vlan of 1. i want it to be the management vlan.
so to match the setup, do i leave it's vlan as 1?
when i add the other 2 vlans, do i set them up as:
- network assigned
- static vlan id 10?
when it is set to default, i don't see where to input the vlan id.
i appreciate the help, the access point was a gift and i'm not as tech savvy as some.