Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How authentication works in controller ? and how to confirm whether it is using TACAS/RADIUS ?

This thread has been viewed 0 times

  • 1.  How authentication works in controller ? and how to confirm whether it is using TACAS/RADIUS ?

    Posted Jul 10, 2014 04:32 PM

    I see that there are two servers (Radius and Tacacs) in aaa configuration. How to confirm which protocol controller is using for authentication.. In my ACS controllers are registered with one IP address and now ACS logs showing that auth requests are coming from different IPs than what already there in ACS. How to change it ? Appreciate your help. Thanks.



  • 2.  RE: How authentication works in controller ? and how to confirm whether it is using TACAS/RADIUS ?

    EMPLOYEE
    Posted Jul 10, 2014 04:34 PM
    Look under configuration > administration and see what server group is set for management authentication.

    You can also run:
    Show aaa authentication-server mgmt