Wireless Access

last person joined: 2 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How can I change the default AP group new AP's needs to join on an WLC?

This thread has been viewed 0 times

  • 1.  How can I change the default AP group new AP's needs to join on an WLC?

    Posted Jun 17, 2016 07:16 AM

    On the 7205 controller I'd like to change the default AP group to a profile I created, so new AP's will automaticly join this group and start sending out the SSID's etc. Now they join the default group and I have to manually move them to the righ AP group.



  • 2.  RE: How can I change the default AP group new AP's needs to join on an WLC?

    EMPLOYEE
    Posted Jun 17, 2016 07:45 AM
    There is only one default group. You'd have to add your VAPs / config to the
    default group (although this is not recommended unless you're whitelisting
    APs)


  • 3.  RE: How can I change the default AP group new AP's needs to join on an WLC?

    Posted Jun 17, 2016 07:52 AM
      |   view attached

    Ok, so correct me if I'm wrong, there's no way to change with new created AP group is the default group that new AP's will join. I've added an example where I want new AP's to join the Ap Group "RAAMWERK" by default.



  • 4.  RE: How can I change the default AP group new AP's needs to join on an WLC?
    Best Answer

    EMPLOYEE
    Posted Jun 17, 2016 08:27 AM

    There is no way to change that.  Correct.