Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to see what vlans are configured on Instant Virtual COntrolelrs

This thread has been viewed 0 times

  • 1.  How to see what vlans are configured on Instant Virtual COntrolelrs

    Posted Jun 13, 2019 05:54 PM

    I have a locaiton where we are using 3 x Aruba IAP 325s.  These 3 IAPs are setup in a vittual controller.

     

    I am trying to investigate what VLan ID is used for the Guest networks.  The IAPs are connected to a DMZ vlan that is used for guest interent only access.  How can I find out what vlans are configured on the Virtual COntrolelrs or the IAPs?



  • 2.  RE: How to see what vlans are configured on Instant Virtual COntrolelrs

    EMPLOYEE
    Posted Jun 13, 2019 08:42 PM

    "show networks"



  • 3.  RE: How to see what vlans are configured on Instant Virtual COntrolelrs

    Posted Jun 13, 2019 09:13 PM

    All of the IAPs in the cluster will have the same VLANs - this is the way that Instant works.

     

    But don't forget to check all of the places where VLAN can be assigned: SSID configuration, Role configuration, Authentication-based VLAN assignment. Authentication-based role assignement, L2-DHCP (GRE) etc.