Wireless Access

Contributor I

Hpe switches with Cisco APs


I have a client who wants to deploy 2x hpe switches ( JG928A) to connect 80 cisco access points to them (WAP 121). 

Is it feasible to do this?

MVP Guru

Re: Hpe switches with Cisco APs



In terms on PoE the switches are rated at 370W and the APs draw a max of 6W each. 


40 x 6 = 240.


Assuming you have 40 APs on each switch, the APs would draw a max of 240W, which is fine.



ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: