Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP Log analysis help

This thread has been viewed 0 times

  • 1.  IAP Log analysis help

    Posted Jun 12, 2018 10:55 AM

    Hello everyone,

     

    I would like to get information about the following log detail:

    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341197> <DBUG> <10.1.50.216 x:x:x:x:x:x> Send heartbeat to vc 10.1.50.205, length 382.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> recv recovery request from 10.1.50.205: recovery number:1.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> recovery clients(1)
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> Recovery clients,1, request from 10.1.50.205.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341124> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: machine auth token client number-0.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <541036> <INFO> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: send idle timeout, sta x:x:x:x:x:x , idle time-1000.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <541058> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: Add calea state, Station x:x:x:x:x:x, intercept 0.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <541056> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: Add auth state, Station x:x:x:x:x:x, authenticated 0.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341125> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: add reauth ctx client-1.
    Jun 11 14:15:28 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> send recovery request to STM
    Jun 11 14:15:28 10.1.50.216 <10.1.50.216 x:x:x:x:x:x> stm[2962]: recv recovery sta request 1.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341197> <DBUG> <10.1.50.216 x:x:x:x:x:x> Send heartbeat to vc 10.1.50.205, length 382.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> recv recovery request from 10.1.50.205: recovery number:1.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> recovery clients(1)
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> Recovery clients,1, request from 10.1.50.205.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341124> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: machine auth token client number-0.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <541036> <INFO> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: send idle timeout, sta x:x:x:x:x:x , idle time-1000.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <541058> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: Add calea state, Station x:x:x:x:x:x, intercept 0.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <541056> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: Add auth state, Station x:x:x:x:x:x, authenticated 0.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341125> <DBUG> <10.1.50.216 x:x:x:x:x:x> send_part_sta_update: add reauth ctx client-1.
    Jun 11 14:15:38 10.1.50.216 cli[2934]: <341001> <DBUG> <10.1.50.216 x:x:x:x:x:x> send recovery request to STM

     

    x:x:x:x:x:x == Aruba Access Points MAC address

     

    Anomalies often appear on the network. During that period, the client will be disconnected from the network.

     

    Aruba OS version: 

    6.5.4.4_62887  (IAP Cluster)

     

     

    Have you met similar?
    What does the log detail mean?

     

    Thank you very much for your help and information!



  • 2.  RE: IAP Log analysis help

    EMPLOYEE
    Posted Jun 13, 2018 09:25 AM

    Debug logs are meant for engineering and Aruba TAC to analyze.

     

    Please work with your partner or Aruba TAC if you have an issue that is related to these logs.