Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP with VoWiFi

This thread has been viewed 2 times

  • 1.  IAP with VoWiFi

    Posted Sep 21, 2017 02:47 PM

    Hi,

     

    There is some tips/best pratice about using Instant Controller with VoWiFi (handset with SIP...) about roaming ? Filtering...

     

    it is better to have a physical controller when use VoWiFi ?



  • 2.  RE: IAP with VoWiFi

    EMPLOYEE
    Posted Sep 21, 2017 03:06 PM

    If the VOWIFI device already marks traffic as voip, you are halfway there.  If it does not, the controller can mark the traffic, but QOS will only occur from the AP to the client.



  • 3.  RE: IAP with VoWiFi

    Posted Sep 21, 2017 04:30 PM

    It is not possible with IAP ? (for mark traffic)



  • 4.  RE: IAP with VoWiFi

    EMPLOYEE
    Posted Sep 21, 2017 04:37 PM

    Yes, but the IAP can only mark traffic from the AP to the client.  The client is responsible for marking the traffic from the client to the AP.



  • 5.  RE: IAP with VoWiFi

    Posted Sep 23, 2017 02:42 AM
    check out the Aruba IAP VRF document http://community.arubanetworks.com/t5/Validated-Reference-Design/Aruba-Instant-Validated-Reference-Design/ta-p/258782


    #AirheadsMobile