Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IPV6

This thread has been viewed 19 times

  • 1.  IPV6

    Posted Mar 13, 2019 04:35 AM

    Hi,

      I have my current environment and I need to move for IPV4 to IPV6. My setup is really straight forward master-local. I was wondering if there is any documentation regarding migration or any advice. Thanks in advance. 



  • 2.  RE: IPV6
    Best Answer

    EMPLOYEE
    Posted Mar 13, 2019 03:39 PM

    hi ZL.

     

    Are you running version 6.x or 8.x? I have a Mobility master with one MD and some AP's running with IPv6 in my lab. I had no issues with this simple setup. 



  • 3.  RE: IPV6

    Posted Mar 19, 2019 01:19 AM

    Thanks for your reply. I am running ArubaOS 6.x and we will run IPV6 only. Just want to see if there is any type of documentation about it. 



  • 4.  RE: IPV6

    EMPLOYEE
    Posted Mar 19, 2019 01:50 AM

    Hi ZL,

     

    There is a whole section about IPv6 in the manual:

     

    https://www.arubanetworks.com/techdocs/ArubaOS_6_5_4_X_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/IPv6/IPv6.htm%3FTocPath%3DArubaOS%2520User%2520Guide%2520Topics%7CIPv6%7C_____0

     

    I would start there. Most of the important stuff is covered there. 



  • 5.  RE: IPV6

    EMPLOYEE
    Posted Mar 14, 2019 12:12 PM

    For more information about IPv4 migration to IPv6, you might also find this helpful:

     

    http://community.arubanetworks.com/t5/Controller-Based-WLANs/IPv6-Client-Addressing-Technical-Brief/ta-p/428921