Wireless Access

last person joined: 4 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Implement STP in Aruba Controller

This thread has been viewed 0 times

  • 1.  Implement STP in Aruba Controller

    Posted May 20, 2015 11:24 AM

    Hi Guys,

    Actually we have 2 Aruba Controllers (3200 XM) AOS 6.3.1.8 and we need implement STP to connect 2 ports from the controller to the SW Core Cisco (6513).

    What is the best way to implement STP?

    Thanks in advanced.

     

    Regards,

     

    Blanca Nieto



  • 2.  RE: Implement STP in Aruba Controller

    EMPLOYEE
    Posted May 20, 2015 11:29 AM

    Is this for redundancy (different Cisco switches) or to aggregate throughput  (same Cisco switch)?



  • 3.  RE: Implement STP in Aruba Controller

    Posted May 20, 2015 11:35 AM

    Yes, is for redundancy, and we have 2 differents Cisco switches..

     

    Thanks in advanced....



  • 4.  RE: Implement STP in Aruba Controller

    EMPLOYEE
    Posted May 20, 2015 11:38 AM

    So it all depends on what kind of spanning tree you are deploying.  I searched for pvst+ in the knowledgebase and this is the first article:  http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-configure-PVST/ta-p/179474