We have a couple of existing M3 Aruba 6000 controllers in master/local setup which we are ready to replace with 2 x 7220 controllers. We use ClearPass for our .1x authentication such as eduroam.
I thought the least disruptive way to do this would be to add the 7220's as local controllers to our existing setup and then after testing, promote one of the new 7220's to master and retire the 2 old 6000 series controllers.
However, after adding the new 7220 controllers, I am seeing some weird stuff that makes me think they are not integrated correctly.
JPEG-1 shows the existing master controller (Aruba 6000) with the users and roles listed correctly.
JPEG-2 shows what I am seeing from the new 7220 which has been added as a local controller to our existing set up.
The new local controller seems unable to determine roles and is assigning a default-iap-user role to everyone.
I though that by adding a controller to an existing master/local pair, most of the config apart from network details was taken from the master controller?
The only thing I changed once the controllers had been added a new local controllers was to add a new AP group for new building and set the LMS IP to be one of the new 7220 controllers for testing purposes.
Where do i start to look to troubleshoot this?