Wireless Access

Reply
Occasional Contributor II

Invalid VRRP everytime but works

Hello,

 

Everytime I configure a VRRP instance on either the MM or MCs I always get a message at the bottom..

 

WARNING! INVALID VRRP ID!

 

I've used 1,5,10, etc.

 

Everything works fine but was just curious if there is truly another reserved range I'm unaware of. 

 

ASI for COA reserves = 220-255.

 

I've used AOS 8.3.x and the latest 8.4.x.

 

Thanks!

Super Contributor I

Re: Invalid VRRP everytime but works

Where do you get this error?
In the GUI or CLI?

Is this VRRP configured at a cluster or the 'legacy' vrrp setup?

Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Occasional Contributor II

Re: Invalid VRRP everytime but works

GUI

[Logo]

Allan Ruell

Senior Network Engineer

phone: 413-569-4392

email: aar@wca.com

One Whalley way

Southwick MA, 01077

[Facebook icon] [LinkedIn icon] [Twitter icon]
Highlighted
Contributor II

Re: Invalid VRRP everytime but works

This is a bug in the code, happend to me everytime I configure VRRP

Guru Elite

Re: Invalid VRRP everytime but works


@Qlimax wrote:
GUI

[Logo]

Allan Ruell

Senior Network Engineer

phone: 413-569-4392

email: aar@wca.com

One Whalley way

Southwick MA, 01077

[Facebook icon] [LinkedIn icon] [Twitter icon]

SSH into your MM and type "show audit-trail".  Paste into here the commands that were run on the GUI to create the VRRP, and if there were any errors.  Also let us know what versoin of ArubaOS you are creating it on.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: