Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Is it possible to select 2.4 GHz band and 5 GHz band?(APIN-0205)

This thread has been viewed 0 times

  • 1.  Is it possible to select 2.4 GHz band and 5 GHz band?(APIN-0205)

    Posted Mar 30, 2017 09:38 PM
    Hi
    I have a question about selecting band by force.

    I'm emc testing enigineer & using apin-0205 for testing.

    I have to select 2.4 & 5 GHz band when testing wifi device that supports 2.4 ghz & 5 ghz.
    If i want to connect EUT to AP in 2.4 GHz, 5GHz Band of AP should be disable.

    Ex)
    EUT(2.4 GHz) <-----> Apin0205 (Only 2.4 GHz, 5 GHz should be diabled)
    EUT(5 GHz) <-----> Apin0205 (Only 5 GHz, 2.4 GHz should be diabled)

    Please give me some tip.




  • 2.  RE: Is it possible to select 2.4 GHz band and 5 GHz band?(APIN-0205)

    EMPLOYEE
    Posted Mar 30, 2017 10:02 PM

    In the SSID configuration under Advanced, you can say what band you want the SSID to broadcast..

     

    band.png