Wireless Access

last person joined: 7 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

LED's flashing amber

This thread has been viewed 0 times

  • 1.  LED's flashing amber

    Posted Nov 15, 2013 07:25 AM

    I have a test lab and 3 AP's connected to a single controller. All three AP's have their 802.11 LED's continuously flashing amber. The AP's do not show as active on the controller when I check from the CLI. So it appears I have a communications problem. Do the LED's tell me anything or just that they cannot find their master?

     

    Thanks,



  • 2.  RE: LED's flashing amber

    EMPLOYEE
    Posted Nov 15, 2013 07:42 AM

    Is there another controller in the network?  If there is, then would these APs be in there?  Is the AP rebooting?  If not, then it did find a controller to join to.



  • 3.  RE: LED's flashing amber

    Posted Nov 15, 2013 08:00 AM

    The controller and AP's are in a self contained network with nothing else (besides the switch connecting them). They are not rebooting, but they do not appear to have found the controller. Next step is to do a purge.