Wireless Access

Reply
Highlighted
All-Decade MVP 2020

Lan extension

Hello guys,

 

i would know if exist a guide to implement the LAN extension.

i have a controller that have two VLAN:
1) VlAN 1 (MANAGEMENT address).
2) VlAN 20 (for this vlan the controller doesn't have an address)

 

The controller have two interfaces linked to a switch, fa1/7 (in access on VLAN 20)
and fa1/6 (in accesso on VLAN 1).

 

I want to propagate by a RAP the VLAN 20, and if i connect to rap's SSID, the controller links me to the switch in Layer 2.
So is like if i am directly connected to my LAN without routing, and i recive an ip by my external dhcp, and the controller works like a L2 switch.

 

is it possible?
if it is, there is a particular configuration?

 

Best regards
Andrea

Andrea

Accepted Solutions
Highlighted
Valued Contributor I

Re: Lan extension

Entirely possible and very simple.

 

Just create your VAP with whatever other settings you want, and associate it with VLAN 20.

 

Kudos appreciated, but I'm not hunting! (ACMX 104)

View solution in original post

Highlighted
Guru Elite

Re: Lan extension

Under AP> Ethernet Interface Port X configuration> Wired AP, you need to enable it, and put in the VLAN that you want wired devices on.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Valued Contributor I

Re: Lan extension

Entirely possible and very simple.

 

Just create your VAP with whatever other settings you want, and associate it with VLAN 20.

 

Kudos appreciated, but I'm not hunting! (ACMX 104)

View solution in original post

Highlighted
All-Decade MVP 2020

Re: Lan extension

OK now it works!

Andrea
Highlighted
All-Decade MVP 2020

Re: Lan extension

hi,

 

i have tried connect to ethernet port of RAP, but i don't receive any ip.

how can i assign the same Vlan to ethernet port of RAP?

 

thanks in advance

 

Best regards

Andrea
Highlighted
Guru Elite

Re: Lan extension

Under AP> Ethernet Interface Port X configuration> Wired AP, you need to enable it, and put in the VLAN that you want wired devices on.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted
All-Decade MVP 2020

Re: Lan extension

the correct  path is: wizard>Under AP> Ethernet Interface Port X configuration> Wired AP?

Andrea
Highlighted
All-Decade MVP 2020

Re: Lan extension

Perfect, very easy.

 

Thank you, now all works fine.

 

Best regards

Andrea
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: