Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MESH AP deployment with ALE

This thread has been viewed 0 times

  • 1.  MESH AP deployment with ALE

    Posted Dec 11, 2015 03:14 AM

    Hi,

     

    As per subject is MESH AP deployment with ALE possible?

    using 5hz for Meshing and 2.4ghz for ALE 

    will there be any accuracy issue for the ALE?

     



  • 2.  RE: MESH AP deployment with ALE
    Best Answer

    EMPLOYEE
    Posted Dec 11, 2015 09:43 AM

    The ALE functionality should work the same regardless (assuming you are doing all the location tracking via 2.4Ghz). However, if these are outdoors, location accuracy likely goes down simply because the algorithm is built for indoors and triangulation, and once you get outdoors, with less RF attenuation, less reflectivity, and higher FSPL likely results in larger location variations and lower accuracy.