Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MM WebGUI View-BUG on APs with deactivated Radio-Modules

This thread has been viewed 0 times

  • 1.  MM WebGUI View-BUG on APs with deactivated Radio-Modules

    Posted Jun 25, 2020 03:02 AM

    We have found a little view-bug.

     

    MobilityMaster with two Aruba7210 WLCs in Cluster (Version 8.6.0.4)
    We have five Accesss-Points AP375 with only 802.3af PoE.
    Therefore the Radios of this APs are down. (but the Access-Points are still up; only Radio-Modules are down; the status of the APs is inactive).
    If this Access-Points changed there active/standby connection to the controllers (autobalance of APs; for example after reboot of a controller), this Access-Points were missing in the WebGUI-View.
    We can see them in the CLI with "show ap active" (see attached Pic2, the two APs with the flag 2rI), but in the WebGui they are missing (either in the dashboard first row as well as in the dashboard infrastructure, see attaced Pic1).


    If we restart this Access-Points (power off/on):
    - they reconnect
    - they will be displayed in the CLI as previously
    - and they are again in the View of the WebGui.
    (but they have still deactivated their radio-modules as expected)