Hi,
Thanks for your reply
This is the output of the MASTER
(SMPWAP1) #show switches
All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.222.123.2 SMPWAP1 Building1.floor1 master Aruba7005 6.4.4.5_54063 up UPDATE SUCCESSFUL 0 5
10.222.124.3 SMPWC2 Building1.floor1 standby Aruba7005 6.4.4.5_54063 up UPDATE SUCCESSFUL 10 5
Total Switches:2
This is the output of the backup
(SMPWC2) #show switches
All Switches
------------
IP Address Name Location Type Model Version Status Configuration State Config Sync Time (sec) Config ID
---------- ---- -------- ---- ----- ------- ------ ------------------- ---------------------- ---------
10.222.124.3 SMPWC2 Building1.floor1 standby Aruba7005 6.4.4.5_54063 up UPDATE SUCCESSFUL 0 5
So, In backup/master scenario as mine, what happens if the master goes down? The backup takes over and will recognize the AP?
Also, I have more than 1 VRRP instance. The masster redundancy si configurable just for one. Is it enough to failover all VRRP sessions?
master-redundancy
master-vrrp 1
peer-ip-address 10.222.123.3 ipsec eba32ef2fa02f8a8dd026781d41cbf09830003ebc5edb304
!
vrrp 1
priority 110
ip address 10.222.123.254
description "Management"
vlan 1230
preempt delay 10
no shutdown
!
vrrp 2
priority 110
ip address 10.222.105.2
description "Radius-Subnet"
vlan 1050
preempt delay 10
no shutdown
!
vrrp 3
priority 110
ip address 10.222.192.1
description "Yoti Staff"
vlan 1920
preempt delay 10
no shutdown
!