Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mesh Link

This thread has been viewed 4 times

  • 1.  Mesh Link

    Posted Nov 03, 2014 09:43 AM

    I have a question about MESH links. Please see the screenshots attached.

     

    Looking at one mesh link i can see tx/rx link at 130/130 and the other one says 65/65 does this mean one of my antennas is not working?

     



  • 2.  RE: Mesh Link

    Posted Nov 03, 2014 12:34 PM
    Anyone?


  • 3.  RE: Mesh Link

    Posted Nov 03, 2014 12:51 PM

    That value will vary depending on the Quality of the Mesh link

     

    Just like a typical wireless client connection 



  • 4.  RE: Mesh Link

    EMPLOYEE
    Posted Nov 03, 2014 02:01 PM

    There could also be varying degrees of interference, noise floors, etc. What antennas/link distance, etc is there on each side?

     

    One other thing, those numbers are not an immediate snapshot and are traffic dependent. You could look within the CLI guide to pull more instantaneous metrics from the mesh link, but ultimately are you seeing bi-directional speed variances or is it stable and consistent?