See my comment on your other thread on this topic.
(HH-VMC1) #show interface gigabitethernet 0/0/0
GE 0/0/0 is up, line protocol is up
Hardware is 10 Gigabit Ethernet, address is 00:0C:29:CD:4E:CB (bia 00:0C:29:CD:4E:CB)
Description: GE0/0/0
Encapsulation ARPA, loopback not set
speed (10 Gbps)
MTU 1500 bytes, BW is 10000 Mbit
Last clearing of "show interface" counters 42 day 8 hr 45 min 17 sec
link status last changed 42 day 8 hr 42 min 44 sec
547248900 packets input, 215995525137 bytes
Received 42497575 broadcasts, 0 runts, 0 giants, 0 throttles
0 input error bytes, 0 CRC, 0 frame
42497575 multicast, 504751325 unicast
91384109 packets output, 18576731965 bytes
0 output errors bytes, 0 deferred
0 collisions, 0 late collisions, 0 throttles
This port is TRUSTED
(HH-VMC1) #
Note ifwhen the vSwitch is mapped to 10G interfaces, the bandwidth available will be 10G (10G virtual interface on VMC to 10G interface uplink to vSwitch to 10G physical link to uplink switch). No single VMC of any size will ever exceed 10G of real throughput, so LAG is only used for redundancy. VMC50 would likely never exceed 1G.