Hi Guys,
I have just started a new role and I come from a Cisco background. The network I have to maintain is an Arena and I have been tasked with putting up a new SSID for the betting terminals. I thought how hard can it be, but I cannot seem to get past the last stage. We have created a new VLAN within or HP switching network and confirm that VLAN 500 was working as it should be by configuring devices and pinging the appropriate web pages etc on the internal server. The problems seem to happen when we try to connect to the wireless network.
We have a 7210 Controller and a clear pass server. I am not sure of the clearpass server but I did not believe it was used but maybe I am wrong
I have created a new VAP and allocated the appropriate SSID to this using WPA2 with PSK as advised. The controller is not allocating IP addresses to the devices this is all being controlled by the betting companies gateway which is in the VLAN with DHCP trust etc enabled.I have tested the switched network by setting up ports as access ports within the VLAN on the network and everything works.On the wireless network I receive an IP address within the IP address range the problem is I cannot route to an internal IP addresses on the VLAN. I have tried changing roles and traced the system to check that I have been allocated the correct role using the
Show log user-debug with the mac
Show User
show dot1x supplicant-info list-all
Everything looks okay but still cannot route to anything within the VLAN.
Any help or pointers greatly appreciated
Thanks,
Gavin