Wireless Access

Regular Contributor II

New controller 7210 ( removing 3200)



We have a client that as a 3200XM controller  with 30 AP's and is going to migrate to a 7210 controller, for the purpose of getting more 50 AP's


We have several sites all connected to main site A. All AP's in the remote sites are physically connected to main site A.


So in the near future we are going to install more than 50 new and also those ones are going to connect to the main site.


The 7210 will be the master controller , managing 80-100 AP's ( ones at main site , other in small sites direclty connected to the main).


In a remote site can i reuse the 3200 to serve the local AP's? Since we have only one 7210 on this site we where thinking in getting the 3200 for some kind of redundancy..




Guru Elite

Re: New controller 7210 ( removing 3200)

Yes, you can but keep in mind that some of the newer features on the 7200 may not be available on the 3200XM.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
Showing results for 
Search instead for 
Did you mean: