Wireless Access

Reply
Contributor I

No mesh-cluster-recovery profile is generated in Controller

Hi all,

 

As per 6.4 UG, it mentioned that a mesh-cluster-recovery profile will be generated in master controller after meshing is configured and provisioned.

But in the "show running config | include recovery" i don't see any output of it.

Please help.

 

Thanks,

 

Re: No mesh-cluster-recovery profile is generated in Controller

http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-is-the-AP-mesh-recovery-profile-used/ta-p/181396

Sent from Outlook for iPhone
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Guru Elite

Re: No mesh-cluster-recovery profile is generated in Controller

Try this command: 

 

show ap mesh-recovery-profile


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Contributor I

Re: No mesh-cluster-recovery profile is generated in Controller

Got it.. thanks!

 

the show running config | include recovery is misleading..haha

 

Re: No mesh-cluster-recovery profile is generated in Controller

It was removed out of the running config around the 6.4 release, but Colin's command does expose it.

Jerrod Howard
Sr. Technical Marketing Engineer
New Contributor

Re: No mesh-cluster-recovery profile is generated in Controller

Waht about AOS8? I try to configure mesh on my VMC, but the GUI says 'No mesh recovery cluster profile.' 

In the CLI I see the same error:

#show ap mesh-recovery-profile
No AP Mesh Recovery profile is found

What can be a problem here? Why VMC doesn't generate the recovery profile automatically? How can I enforce this?

THX

Cheers,

LG

Guru Elite

Re: No mesh-cluster-recovery profile is generated in Controller

Do you have an MM in place?  According to the user guide here: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Web_Help_Index.htm#ArubaFrameStyles/Mesh/Mesh_Profiles_.htm?Highlight=mesh%20recovery it is generated dyamically by the MM.  That might not be available if you do not have an MM.

 

I do see a mesh cluster profile on my MD and an MM is in place.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: No mesh-cluster-recovery profile is generated in Controller

Hi Joseph!

 

No unfortunately this is a standalone VMC, I have no MM installed.

 

Regards,

LG

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: