Hi Experts,
Please i need your help yesterday i was able to ping the IP of the controller by connecting to interface of port 2 with my laptop
suddenly it is stopped pinging i was unable to ping the controller ip what could be the issue?
(OAW-4550) #show ip interface brief
Interface IP Address / IP Netmask Admin Protocol
vlan 10 10.200.200.11 / 255.255.248.0 up up
vlan 1 192.168.10.100 / 255.0.0.0 up up
loopback unassigned / unassigned up up
(OAW-4550) #
(OAW-4550) #
(OAW-4550) #
(OAW-4550) #show vlan
VLAN CONFIGURATION
------------------
VLAN Description Ports AAA Profile
---- ----------- ----- -----------
1 Default GE0/0/3 GE0/0/4-0/5 Pc0-7 N/A
10 VLAN0010 GE0/0/3 GE0/0/4-0/5 N/A
(OAW-4550) #show port stat?
stats Show physical port statistics
status Show physical port status
(OAW-4550) #show port stat
Port Status
-----------
Slot-Port PortType adminstate operstate poe Trusted SpanningTree PortMode
--------- -------- ---------- --------- --- ------- ------------ --------
0/0/0 GE Enabled Down N/A Yes Disabled Trunk
0/0/1 GE Enabled Up N/A Yes Disabled Trunk
0/0/2 GE Enabled Up N/A Yes Disabled Access
0/0/3 GE Enabled Up N/A Yes Forwarding Trunk
0/0/4 GE Enabled Down N/A Yes Disabled Trunk
0/0/5 GE Enabled Down N/A Yes Disabled Trunk
(OAW-4550) #ping 10.200.200.11
Press 'q' to abort.
Sending 5, 92-byte ICMP Echos to 10.200.200.11, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0.043/0.0564/0.091 ms
(OAW-4550) #
The problem i was not able to ping the ip by lan cable it was pinging from console?
Next thing and i need to connect the alcatel core switch +controller+edgeswitch
where all the aps getting ip addresses from the controller dhcp
what configuartion to be done in all the 3 switches.? whtether trunk port in all switches or what?
please very grateful if somebody help me