Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

PAP authentication with VIA

This thread has been viewed 0 times

  • 1.  PAP authentication with VIA

    Posted Nov 17, 2011 11:13 AM

    Hi

     

    Im trying to configure VIA and made all the necessary configurations but VIA still tries to authenticate with PAP instead of MSCHAPv2 and what is set as authentication type in the aruba controller

    I talked to a guy from aruba and he said it was a bug and they are working on it......somebody have any news about it

     

    thanks

     

    /Carlos



  • 2.  RE: PAP authentication with VIA

    Posted Nov 21, 2011 10:47 AM

    I was under the impression that VIA authentication is PAP only at present.



  • 3.  RE: PAP authentication with VIA

    Posted Nov 21, 2011 12:27 PM

    Yes, if you use IKEv1 then PAP is used between the controller and the external radius server. However, ArubaOS 6.1 and VIA 2.X allow you to use IKEv2 which supports EAP-MSCHAPv2 and EAP-TLS