Currently we're using Pantech UML 290 4G cards. The new cards we've received are Pantech UML 295's. The current config looks like this:
config t
provision-ap
read-bootinfo ap-name <AP_NAME> (AP_NAME is the name of the RAP-5 that is assigned to it. Default is usually MAC address)
4g-usb-type pantech-lte
usb-dial ATDT*99***3#
link-priority-cellular 120 (Assigning a higher number makes whichever link become what the RAP first goes too)
link-priority-ethernet 110
master <public ip address of the cotroller> nnn.nnn.n.nnn
reprovision ap-name <AP_NAME>
end
What needs to change to allow the use of the UML 295?