interface gigabit-ethernet 0
mode none
switchport trunk allowed-vlan 1,3,7,202,302,620
switchport trunk native vlan 7
interface loopback 0
ip address from-mac
router-id
interface vlan 7
description data
ip address 10.2.2.30/16
mtu 1500
I have changed the mode to gateway, should this only be set on the one side?
at each side the AP's are connected to an Alcatel-Lucent switch with the following ports vlans.
MS-IDF4-6450-> show vlan port 1/5
vlan type status
--------+---------+--------------
3 qtagged forwarding
7 default forwarding
202 qtagged forwarding
302 qtagged forwarding
620 qtagged forwarding