Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP-2G Failed to connect with Controller

This thread has been viewed 3 times

  • 1.  RAP-2G Failed to connect with Controller

    Posted Sep 02, 2013 03:58 AM

    Guys,

     

    Am referencing this solution

    http://community.arubanetworks.com/t5/ArubaOS-and-Controllers/Rc-error-ike-xauth-authorization-failed/m-p/12115#M4994

    I seem to have the same error but for some reason, I cannot see the solution given by cjoseph. Perhaps someone here can help me (since cjoseph is not currently online) and its rather urgent.

     

    Am getting the same error

     

    Sep 2 08:25:45 <localdb 133006> <ERRS> |localdb| User 00:0b:86:c3:50:9d Failed Authentication
    Sep 2 08:25:45 <isakmpd 103048> <ERRS> |ike| IKE XAuth failed for 00:0b:86:c3:50:9d

     

     

    Regards,

    fmo



  • 2.  RE: RAP-2G Failed to connect with Controller
    Best Answer

    EMPLOYEE
    Posted Sep 02, 2013 05:21 AM

    To add to the whitelist, you'll need to go to Configuration > Wireless > AP Installation > Whitelist and add the mac into there.

     

    Make sure you have a local nat pool configured as well.

     

    :smileyhappy:



  • 3.  RE: RAP-2G Failed to connect with Controller

    Posted Sep 02, 2013 05:24 AM

     

    I had alresdy done that, but my AP was still not visible under the ALL APs tab. I had to restart the Controller several times...then it worked. 

     

    Thank you.