Wireless Access

Regular Contributor I

RAP 3 WN Ethernet Port Configuration

Hi Community,


I want to configure my RAP 3, when I put the Notebook in the eth2 port I come in the VLAN 30 in our company.

The RAP works fine with the ssids I configured. But I get no IP on the eth2 port.


I´ve configured it on the Controller, the Controller is a 620er with firmware







Have anyone an idea?

Guru Elite

Re: RAP 3 WN Ethernet Port Configuration

Can you assign VLAN 30 to a port on your controller?  Plug in a laptop and see if you get an ip address..

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
Showing results for 
Search instead for 
Did you mean: