Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP-3WN for Huawei 3276

This thread has been viewed 1 times

  • 1.  RAP-3WN for Huawei 3276

    Posted Dec 12, 2014 06:02 AM

    Hi,

     

    Can anyone tell how to setup a RAP-3WN using a Huawei 3276 usb Modem? The controller for remote APs is in a dmz with OS 6.3.1.5. This is the first time i am doing it, please explain step by step.

     

    Thanks for the help!!!

     

    Regards,



  • 2.  RE: RAP-3WN for Huawei 3276

    EMPLOYEE
    Posted Dec 16, 2014 03:49 AM

    Immi,

     

    The Huawei 3276 has a minimum software releas of 6.4 for controller and 4.1 for Instant.

     

    Provisioning parameters:

     

    usb_type=huawei-cdc

    cellular_nw_preference=auto

    usb_dev=0x12d11506

     

    There are multiple versions of the E3276, not every type has been tested. The E3276-150 seems quite common and is reported to work.

     

    Herman



  • 3.  RE: RAP-3WN for Huawei 3276

    Posted Dec 17, 2014 02:16 AM

    hrobers,

     

    Thank you, will upgrade the image and try it out.

     

    Regards,



  • 4.  RE: RAP-3WN for Huawei 3276

    Posted Jan 14, 2015 05:00 AM

    Hi,

     

    I upgraded the image to 6.4 and the RAP is up in the Remote controller, but the USB doesnt seem to work. I provided the following details in the USB parameters.

     

    usb_type=huawei-cdc

    cellular_nw_preference=auto

    usb_dev=0x12d11506

    PPP username= Orange

    PPP Password = ********

     

    Do I need to specify other parameters as well:

    TTY Device data path

    TTY Device control path

    Initialization String

    Modeswitch

     

    if i have to give these, what would be the values for it.

     

    Thanks for your time and support...

     

    Regards,

    Immi

     



  • 5.  RE: RAP-3WN for Huawei 3276

    EMPLOYEE
    Posted Jan 14, 2015 05:39 AM

    Those parameters are optional, you should be able to leave them empty.

     

    If it does not work for you, please open a TAC case.

     

    Herman