Hello.
Please could you help me with this configuration doubt?
I have read a lot of topics about this discussion but really I can´t find a clear solution for this deployment.
Our customer has a Headquarters with a couple of 7030 Controllers in a Master standby fashion.
A new branch office with five Aps needs to be deployed. Both offices will be connected through a MPLS.
Three corporate SSIDs must be broadcasted in the branch office, two of them with 802.1x authentication against a ClearPass PM located in the HQ.
There is a Guest SSID with captive portal too, and as far I have understood this one is not supported in bridge mode.
Our customer wants wireless clients in the branch get their IP address from a local DHCP server, besides in the case of WAN failure the Access Points in the branch must remain active with the connected clients (those that were connected before the link failure).
RAP with split tunnel mode doesn't support local dhcp addressing for clients connected to the 802.1X SSIDs.
Is there any kind of configuration that supports two SSIDs in bridge mode with another one in tunnel mode under the same AP-Group?
What kind of configuration do you recommend me?
Thank you in advance.
Regards.