Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP wired Traffic display

This thread has been viewed 0 times

  • 1.  RAP wired Traffic display

    Posted Sep 12, 2018 01:50 AM

    Hi,

     

    we have a bunch of RAPs (303H) as Wired "Router" for small branches (50-100M internet). Is there any chance to display those traffic in the controller Gui ? Currently it is very hard to find out whats up on the wired port and whats up with the users behind them. I know that sdwan faces those "black holes" but currently iam in a rap design with 20% of wireless and 80% of wired "tunneld" traffic and currently i didn't see them in apprf and in bandwith. Is there anyone who fixed this missing display features on the wired port?

     

    Thanks in advance



  • 2.  RE: RAP wired Traffic display
    Best Answer

    EMPLOYEE
    Posted Sep 12, 2018 01:58 AM

    You would make those ports "untrusted" and make the initial role of the AAA profile applied to that port have an "allowall" acl, so no traffic is blocked.  Users on wired ports will appear as users in the controller and you will be able to see their traffic.



  • 3.  RE: RAP wired Traffic display

    Posted Sep 12, 2018 02:32 AM

    Thanks

     

    you are right. The traffic is currently "bypassing" the firewall and the apprf with the hook "trusted". So untrust and combined with a policy it pops up  in apprf!  -> Tested and solved!

     

    Thanks for that fast answer on this