Wireless Access

last person joined: 15 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Radius issues

This thread has been viewed 3 times

  • 1.  Radius issues

    Posted Feb 04, 2013 07:19 AM

    I always have the error on the "Network Policy Server" -> "" A RADIUS message with the Code field set to 2, Which is not valid, what field received on port 1812 from RADIUS client Networkcontroller_4 Valid values of the RADIUS code. are documented in RFC 2865. ""

     

    please suggest any solutions



  • 2.  RE: Radius issues

    EMPLOYEE
    Posted Feb 04, 2013 07:47 AM

    According to this:  http://technet.microsoft.com/en-us/library/cc735325(v=ws.10).aspx

     

    Make sure the NPS is not configured to require the message authenticator attibute.

    Also, check and make sure the preshared key between the controller and NPS are correct.

     

    If you have any further issues, you probably have to contact Microsoft for a proper explanation of that message.