Wireless Access

Reply
Occasional Contributor II

Remove down AP from Mobility Master 8.2.1.1

I have an access point that failed I ran the following command from the cli clear gap-db ap-name xxx and was able to replace the AP using the same name. However it stills hsows as a down AP on the Mobility Master. How do I clear this?

Guru Elite

Re: Remove down AP from Mobility Master 8.2.1.1

You should clear it using the wired mac address instead:

 

"show ap database long" will give you the wired mac


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: Remove down AP from Mobility Master 8.2.1.1

Thanks that worked. No way to do this from the GUI?

Guru Elite

Re: Remove down AP from Mobility Master 8.2.1.1

Not that I know of.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor I

Re: Remove down AP from Mobility Master 8.2.1.1

Is it possible to delete a down AP from the GUI? 

It was possible on the 6.5.x code, not sure how in the 8.x GUI. 

Please advise. 

Highlighted

Re: Remove down AP from Mobility Master 8.2.1.1


@possibleyp wrote:

Is it possible to delete a down AP from the GUI? 

It was possible on the 6.5.x code, not sure how in the 8.x GUI. 

Please advise. 


Per the comment above yours, the only option is through the CLI today.


Charlie Clemmer
Aruba Customer Engineering
New Contributor

Re: Remove down AP from Mobility Master 8.2.1.1

 
Frequent Contributor I

Re: Remove down AP from Mobility Master 8.2.1.1

does this need to be done on the MM or on the specific controller that it was attached to?   I tried to remove one that shows a  status of denied and it did not remove it (on the MM is where I issued the clear command).

Guru Elite

Re: Remove down AP from Mobility Master 8.2.1.1

If the access point is still physically trying to connect and is still denied, it will reappear in the database.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: Remove down AP from Mobility Master 8.2.1.1

That's one of many drawbacks in the GUI.  My two cents: the 8.2x GUI is unusable, and yet it's no picnic using the CLI either. I feel like there's no good option for configuring/troubleshooting the Aruba Controllers.  That's the only thing I don't like my Aruba wireless equipment.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: