Wireless Access

Reply
Occasional Contributor II

Reseting RAP 155/205

How do you reset RAP 155 or a 205 to factory defaults? I'd like to convert either of these to IAP but can't seem to reset them. Tried keeping the reset button pressed for 5-10-15-30 seconds after booting it, but no luck. Not getting any IP addresses from the ports or seeing any new WLANs

 

Thanks!

Re: Reseting RAP 155/205

The reset button needs to be pressed while applying power to the AP.

 

The RAP-155 can be reset to Instant. The 205 will depend on what model it is. If it has a reset button, it should be revert back to Instant mode as well. 

 

If you are able to connect to the console port of the AP as you're attempting to reset, you should see messages indicating what's going on.


Charlie Clemmer
Aruba Customer Engineering
Occasional Contributor II

Re: Reseting RAP 155/205

It's APINH205, other one was APINR155

MVP Guru

Re: Reseting RAP 155/205

Re: Reseting RAP 155/205


@pubjohndoe wrote:

It's APINH205, other one was APINR155


All versions of the 205 will list as APINH205. The Instant version will have a sticker on the back that lists IAP-205-US (or some other country code), where the standard CAP version will have a sticker simply listing AP-205.


Charlie Clemmer
Aruba Customer Engineering
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: