Ok, so ADP is enabled on my master, disabled on the locals. I still see the same log on the console of the CLI. This is the first AP deployment in Latin America for us. the US APs work fine, but these keep going into that reboot loop.
10.249.122.161 255.255.255.0 10.249.122.26 10.249.122.1
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
The system is going down NOW !!
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
[ 163.857482] Restarting system.
[ 163.881474] Going down for restart now
APBoot 1.5.5.8 (build 57191)
Built: 2016-11-04 at 17:53:10
Model: AP-32x
DRAM: 491 MB
SF: Detected MX25U3235F with page size 64 kB, total 4 MB
Flash: 4 MB
NAND: 132 MiB
PCIE0: link up
PCIE1: link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3af POE
In: serial
Out: serial
Err: serial
Net: eth0, eth1
Radio: qca9990#0, qca9990#1
Reset: warm
FIPS: passed
Hit <Enter> to stop autoboot: 0
apboot>
Things to look for? the DNS alias pings @ my master address.
At a loss here. AP reset didnt change results.