Wireless Access

last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Setting SSID to 5GHz only

This thread has been viewed 2 times

  • 1.  Setting SSID to 5GHz only

    Posted Aug 14, 2020 02:52 PM

    I'm having trouble finding the spot where I configure a certain SSID to be 5Ghz only.

     

    This is with a Mobility Controller.

     

    Any suggestions?

     

    Thank you,



  • 2.  RE: Setting SSID to 5GHz only
    Best Answer

    Posted Aug 14, 2020 03:43 PM

    Hi!

     

    Check this.

     



  • 3.  RE: Setting SSID to 5GHz only
    Best Answer

    Posted Aug 14, 2020 06:40 PM

    I'm working with 8.4.0.2

     

    Just can't find the spot.



  • 4.  RE: Setting SSID to 5GHz only
    Best Answer

    Posted Aug 15, 2020 03:28 AM

    Hi!

     

    Go to:

    Configuration > System > Profiles > Wireless LAN > Virtual AP > YourVAP > RF

    and choose your band.

     

    Basically it is the same as under 6.4 / 6.5 but the profiles menu moved to configuration - system.

     

    You also can click on your user name (right hand side on the top) go to preferences and select advanced view (or like that).
    Now you should also see a profiles link on the right side of the AOS 8 style config menus.

     

    If you operate a Mobility Master deployment, change this setting under the managed network node.