Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Simultaneous Telnet connections to my Aruba Mobility Controller

This thread has been viewed 0 times

  • 1.  Simultaneous Telnet connections to my Aruba Mobility Controller

    Posted Nov 23, 2011 04:46 PM

    Hi !

     

    I would like to increase the number of simultaneous Telnet connections allowed to my Aruba Mobility Controller : ArubaOS 5.0.3.3

    User concerned is "admin" with "root" role.

     

    Any idea how i can do that ?

     

    Thanks for all and best reagards,



  • 2.  RE: Simultaneous Telnet connections to my Aruba Mobility Controller

    EMPLOYEE
    Posted Nov 23, 2011 05:19 PM

    That cannot be increased, unfortunately.

     

    You can type "show loginsession" to see who is currently logged in.  You can also type, from the console "clear loginsession <x>" to disconnect that user, but only when you are connected to the physical console.

     



  • 3.  RE: Simultaneous Telnet connections to my Aruba Mobility Controller

    Posted Nov 23, 2011 06:50 PM

    well...ok...

    Do you know what is, officially, the max simultaneous connections allowed on telnet port, by default ?

     

    In my tests it seems this is 4-5-6...not really sure...

     

    Note Answer : i've improved my script : this is 5 simultaneous telnet connections.

     

    Regards



  • 4.  RE: Simultaneous Telnet connections to my Aruba Mobility Controller

    Posted Nov 23, 2011 09:38 PM

    5 is the max number of concurrent telnet session.  Keep in mind to set the "loginsession timeout" to a reasonable time.

     

    In other words, if you set the loginsession timeout to 0 (infinite) and then you inadvertently close the ssh session abruptly, you may put yourself in a bind ..