We are using an older 3200A (Non XM) Mobility controller. Unfortunately this system was in place before I started here, so i'm not sure how exactly it was setup.
Here is the current setup as best as I can describe:
Aruba 3200A - ArubaOS 6.0.2.0
16x AP-105's connected throughout our facilities.
Controller detection via DNS entry.
We used to have it setup to do a captive portal, but we removed that and just have an open guest wifi.
Clients can connect just fine and pick up an IP address, but the controller appears to be throttling the connections. I can't seem to find any policies or rules setup for bandwidth shaping.
All users are getting a consistent 4mb/s upload/download speed. Other than the speed issue, everything else is working fine.
Where would I look to see if it's throttling connections? AP's are not setup to use a building/floor plans. Controller is connected directly to firewall which has no QoS of any kind setup and that is connected to our 100+mb/s internet provider.
Firewall and internet connection are not the bottleneck as speed tests show 80mb/s+.
There are about 20 clients on average connected. Mostly iPhone and Android's. The system is very underutilized right now because everyone complains about the speed.
Any help would be greatly appreciated!