Wireless Access

Reply
Highlighted
Occasional Contributor II

Stop across vlan airprint

We have several wireless locations and every location has it own dchp scope on different vlan. All ap's are managed from a MM with 2 MC setup as a cluster using OS8.4.0.2_70086.

 

We use all sorts of wireless communication on our locations, therefore we made rule in managed network, stating everything allowed (see attached file). 

 

But i did'nt expect, to see airprinters showing up across all vland. I now need to find that single rule, that stops airprinter, from showing up across all my locations. 

Highlighted
Guru Elite

Re: Stop across vlan airprint

You need to make sure to set Airgroup to disable.

https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/airgroup/conf-airg.htm

 

  Airgroup gives you the ability to propagate Airprint devices across VLANs, but it has an undesired effect in your situation.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN
Highlighted
Occasional Contributor II

Re: Stop across vlan airprint

I will test your suggestion, when i can get back to work onside again. Tnx.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: