Wireless Access

Reply
Highlighted
Occasional Contributor I

Upgrade 8.2 to 8.3

Hi All

 

Does anyone have a guide on the best method to take to upgrade redundant vMM and physical redundant MCs from 8.2 to 8.3?

 

Cheers

David


Accepted Solutions
Highlighted
Guru Elite

Re: Upgrade 8.2 to 8.3

You need to make sure that (1) The backup MM is synchronized with the primary MM first (2) your MDs are pointing at the VRRP between the MM and Backup (3) the MM has to be upgraded first, and then the backup MM (4) the MDs are upgraded after both the MM and backup MM are upgraded successfully.

 

Make sure you do a backup flash of the primary MM before you start.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Upgrade 8.2 to 8.3

You need to make sure that (1) The backup MM is synchronized with the primary MM first (2) your MDs are pointing at the VRRP between the MM and Backup (3) the MM has to be upgraded first, and then the backup MM (4) the MDs are upgraded after both the MM and backup MM are upgraded successfully.

 

Make sure you do a backup flash of the primary MM before you start.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted
Occasional Contributor I

Re: Upgrade 8.2 to 8.3

Thanks, worked a treat.

 

Cheers

David

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: