Wireless Access

Reply
Regular Contributor I

Upgrading an old RAP to work on 6.3

I have an old RAP-2WG running 5.0.0.0. 

Of course it doesn't want to come up on my controller running 6.3.

Does anyone have a flashing procedure? I found some info suggesting I need a controller running 5.0.0.4 but unfortunately that's not an option for me.

regards

B


--
ACMA ACMP
Guru Elite

Re: Upgrading an old RAP to work on 6.3

The easiest way to do it would be to open a TAC case. They can point it at controller(s) to do the step upgrade.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: