Wireless Access

Reply
Occasional Contributor I

Use only 1 ssid WIPS

Hi, 

 

I use topic because of one problem in using Aruba controller.
 
I use WIPS.

However, I would like to ask you if there are some conditions.

 

1) Use WIPS as a whole.

2) Some ssid not controlled

(ex. Aruba SSID :           aruba_1   used

                                       aruba_2   used

       Unknown SSID :      test_1      used

                                        test_2      block(WIPS))

 

1) was successful.

But something happened during the 2) course of the play.

 

Any advice is appreciated!

 

Edward Jung.
 
Guru Elite

Re: Use only 1 ssid WIPS

What WIPS policy would you like to enforce? WIPS is general.  What would you  like to do specifically?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Use only 1 ssid WIPS

For example, two SSID on the Aruba controller work normally.

 

 

And there are two SSID visible elsewhere.

(One is normal , one is block)

 

If so, can I configure WIPS to block only one of the two?

Guru Elite

Re: Use only 1 ssid WIPS

What do you want to block?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Use only 1 ssid WIPS

 

I want to block only the SSID I want.

 

example,

 

ssid_1, ssid_2, ssid_3, ssid_4

 

ssid_1 block

ssid_2 not block

ssid_3 block

ssid_4 not block

 

 

Is it possible?

Guru Elite

Re: Use only 1 ssid WIPS

You want to block clients from connecting to SSID1 and SSID3?  If you have encryption or authentication enabled, wouldn't that block them?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Use only 1 ssid WIPS

 

Blocks even if it is encrypted or authenticated.

 

Regardless of the type of SSID (OPEN, encryption, authentication), can I block only what I want through WIPS?

 

Guru Elite

Re: Use only 1 ssid WIPS

What are you blocking?  WIPS can block because of a type of behavior.  What behavior are we blocking?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Use only 1 ssid WIPS

sorry, it 's my mistake.

 

We were not using a wips license.

 

I made a really big mistake.

 

I'll try it again.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: