Hello,
I'm new to Aruba. We have multiple SSID's and users are not able to access the internet via one SSID. I asked the local contact to try to log into WiFi and he was successfully able to authenticate. However, he got an error message stating there is limited availability and he received an error message stating that the certificate has expired. I tried accessing the GUI and I too received an error message stating that the certificate has been revoked. I have 3 licenses on the Aruba 650 and they never expire. Is there a way to udate the current certificate or is there another certificate that I should be using?
(ottedwifi01) #show license
License Table
-------------
Key Installed Expires Flags Service Type
--- --------- ------- ----- ------------
2010-03-08 Never E Power Over Ethernet
06:53:02
2012-04-30 Never E Next Generation Policy Enforcement Firewall Module: 8
13:43:39
2012-04-30 Never E Next Generation Policy Enforcement Firewall Module: 1
13:43:39
License Entries: 3
Flags: A - auto-generated; E - enabled; R - reboot required to activate
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #show license verbose
License Table
-------------
Key Installed Expires Flags Service Type
--- --------- ------- ----- ------------
2010-03-08 Never E Power Over Ethernet
06:53:02
2012-04-30 Never E Next Generation Policy Enforcement Firewall Module: 8
13:43:39
2012-04-30 Never E Next Generation Policy Enforcement Firewall Module: 1
13:43:39
License Entries: 3
Flags: A - auto-generated; E - enabled; R - reboot required to activate
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #
(ottedwifi01) #show ap active
Active AP Table
---------------
Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP 11a Clients 11a Ch/EIRP/MaxEIRP AP Type Flags Uptime Outer IP
---- ----- ---------- ----------- ------------------- ----------- ------------------- ------- ----- ------ --------
default 192.168.26.193 1 AP:HT:6/22/22.5 1 AP:HT:149+/23/23 105 a 496d:7h:36m:32s N/A
default 192.168.26.195 0 AP:HT:11/9/22 0 AP:HT:48-/22/22 105 a 496d:7h:36m:36s N/A
default 192.168.26.197 0 AP:HT:1/22/22 0 AP:HT:44+/22/22 105 a 496d:7h:37m:2s N/A
default 192.168.26.198 0 AP:HT:11/18/22 0 AP:HT:161-/24/24 105 a 496d:7h:36m:7s N/A
default 192.168.26.199 0 AP:HT:11/21/22 0 AP:HT:36+/22/22 105 a 496d:7h:36m:36s N/A
Flags: 1 = 802.1x authenticated AP; 2 = Using IKE version 2;
A = Enet1 in active/standby mode; B = Battery Boost On; C = Cellular;
D = Disconn. Extra Calls On; E = Wired AP enabled; F = AP failed 802.1x authentication;
H = Hotspot Enabled; K = 802.11K Enabled; L = Client Balancing Enabled; M = Mesh;
N = 802.11b protection disabled; P = PPPOE; R = Remote AP;
S = AP connected as standby; X = Maintenance Mode;
a = Reduce ARP packets in the air; d = Drop Mcast/Bcast On; u = Custom-Cert RAP;
r = 802.11r Enabled
Channel followed by "*" indicates channel selected due to unsupported configured channel.
"Spectrum" followed by "^" indicates Local Spectrum Override in effect.
Num APs:5
(ottedwifi01) #