Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Using AP-205s with IPSec

This thread has been viewed 0 times

  • 1.  Using AP-205s with IPSec

    Posted Oct 16, 2014 01:22 PM

    Any guidance on how to configure AP-205s to use IPSec with certificate authentication? When I provision the AP-205 through the GUI (Aruba OS 6.4.2.2) there is no option available to set the AP as a Remote AP.

     

    Are the AP-205s capable of being set up as Remote AP with Remote AP Authentication set as Certificate?


    #AP205


  • 2.  RE: Using AP-205s with IPSec

    Posted Oct 16, 2014 01:56 PM

    The AP-205 can operate as  RAP; and does has a TPM module for cert-based authentication support.    Can you send a screenshot of the provisioning page of an AP-205?  It should have an Authentication Method section; which includes Remote AP options. 

     

     

     

     


    #AP205


  • 3.  RE: Using AP-205s with IPSec

    Posted Oct 16, 2014 02:06 PM
      |   view attached

    Please find attached a screen shot of the provisioning page for an AP-205.


    #AP205

    Attachment(s)

    docx
    ProvPageAP205.docx   80 KB 1 version


  • 4.  RE: Using AP-205s with IPSec
    Best Answer

    Posted Oct 16, 2014 02:34 PM

    Can you try a different browser or even a different machine?   The format of that page does not look correct, for example the section under AP Installation Mode typically is under the Authentication section.

     

     


    #AP205


  • 5.  RE: Using AP-205s with IPSec

    Posted Oct 16, 2014 02:40 PM

    It was the browser.  I was using firefox and tried it with Chome and the GUI provisioning page looks correct. Thanks for your help.


    #AP205