Wireless Access

Reply
Highlighted
New Contributor

VIA termination

Hello,

 

I have an Aruba 7030 controller I plan on using for vpn access. I have a contoller ip of 172.1.240.250, a dmz address for 172.2.240.250. The over all plan is tohave all sessions come into  the DMZ termainate on a pool on the contoller 172.3.1.0/24. 

 

What I would like is the exit to the interior part of the network to use a seperate interface then the contoller ip address. Trying physcially seperate the traffic from the wirless access comming in and the via traffic going out.

 

the problem is I am new to this product, I have done this on other SSL-vpn acess equipment, just not worked with the aruba product long enough.

thanks

Chance

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: